MACHINE SERVICE AND TUNE-UP

Your sewing machine or serger needs regular service to keep it running smoothly and stitching properly. We'll professionally clean, oil, and adjust your machine so that it's working like new again.

CLEANING

Removing fluff and dust – Technician will start with cleaning the whole machine.

CHECKING THE BOBBIN

Checking the bobbin – The bobbin and bobbin case have the tendency to accumulate lots of dust. Cleaning these will avoid jamming.

LUBRICATION

This is important to prolong the machine’s life span. Proper lubricants will be used as specified by manufacturer.

TENSION

It’s a must to check the bobbin tension and calibrate machine tension as you will get low-quality results and potentially broken or snagged thread if it’s wrong.

BOBBIN WINDER

If the tire is worn or cracked, it should be immediately replaced. Bobbins that are wound unevenly can lead to sewing problems.

ELECTRONICS AND WIRING

Faulty wiring or circuitry means a non-responsive or malfunctioning sewing machine.

HOOK TIMING

Timing that is not adjusted to factory specifications can lead to

missed stitches, poor stitching or a machine that won't sew.

PRICING

Clean Lube Adjust
Non-Computerized Sewing Machine $99
Computerized Sewing Machine $125*
*some advanced machines such as Bernina 770 $150.

Sergers $125.

If parts or excessive labor are required due to poor condition of machine (dirty, rusty, stuck, out of time, etc), you will be contacted for approval of an additional charge.

We pickup and deliver your machine free within 15 miles. There is an additional charge for outlying locations.